Fini F2G2PAK Manuel d'utilisation et d'entretien télécharger pdf (Page 19)

BRAD/NAILER

2) Check that protector (A) of the brad/nailer is working

correctly. Check that is free to move in and out without

any obstruction (Fig. 11).

3) Release the outer part of cartridge (C) from the locked

position, pressing lever (D) (Fig. 12).

4) Slide the outer part of cartridge (C) downwards (Fig. 13).

5) Insert a set of nails (H) in the housing of the cartridge

(L) checking correct positioning (Fig. 14).

6) Slide the outer part of cartridge (C) upwards, pressing

lever (D) at the same time (Fig. 15).

7) Lock the outer part of cartridge (C), releasing lever

(D). Make sure that the cartridge is securely fastened

(Fig. 16).

8) Connect the brad/nailer to the compressor as

explained in the Compressor manual at chapter

“OPERATION - USING THE AIR COMPRESSOR”.

9) Use the compressor regulator to adjust to the

recommended working pressure for the task to be

performed.

10) The brad/nailer is now ready for use. Before

proceeding with the actual work, it is advisable to

practice on a test piece in order to check penetration

of the nails: use a piece of reject wood of a thickness

exceeding the length of the nails. Rest point (A) of

the brad/nailer against the surface of the wood and

press trigger (B). If the nail does not penetrate to the

depth required, set the air pressure to a higher value

WITHOUT EXCEEDING THE MAXIMUM PRESSURE

INDICATED IN THIS MANUAL (Fig. 19).

11) SINGLE SEQUENTIAL MODE

This mode requires the trigger to be pulled each time a

nail is driven. The tool can be actuated by depressing

the protector (A) against the work surface followed by

pulling the trigger.

The trigger must be released to reset the tool before

another nail can be driven.

WARNING:

An improperly functioning tool must not be used.

Do not actuate the brad/nailer unless it is placed firmly

against the work piece.

Fig.16

Fig.11

Fig.12

Fig.13

Fig.14

Fig.15

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Fini F2G2PAK Manuel d'utilisation et d'entretien Page 19

Commentaires sur ces manuels